Missing "enable stacking"

[EtherNation_Use]

Create Date: Nov 22 2012 2:27PM

Hi,

I have two X650 switches and I want to build a stack. So I connect the two nodes by the stacking cables and try to run the easy setup. But the command "enable stacking" isn't available.

Version: 12.6.2.10-patch1-15

Does anyone have an idea?

Thanks
Falk (from Falk_Fischer)

[EtherNation_Use]

Create Date: Nov 28 2012 6:55PM

Stacking does not require a core license. You may wish to check your bootloaders on each stack member and also try running the built-in diagnostics (run diagnostics extended) to see if everything is as it should be. I'm not sure of anything else that could interfere with the availability of the command. (from Ansley_Barnes)

[EtherNation_Use]

Create Date: Nov 26 2012 9:28PM

not sure if you need a Core license to stack them up. I would check that first (from Arpit_Bhatt)