Module in Slot-2 is removed, X460 stacks keep failing.

[Anonymous]

Hi everybody,
I need to know If there is any CLI command (or NetSight Applications tool) I can use to check a Securestack C3 switch for HW issues.

I tried the various "show port ..." commands, but they only show if ports are admin and operationally up or down, whereas I need to run some hardware diagnostics to check if some ports are really working or not.

Thank you in advance for your replies!

[Bill_Stritzinge]

Martin,

Of course... I think I found you in our system, I will email you offline to get the details. If you don't get an email from me in the next hour let me know.

Bill

[Anonymous]

Hi Ian, the resolution was to configure a debounce timer against all the stacking ports.

You can find the resolution here https://gtacknowledge.extremenetworks.com/articles/Solution/Native-stack-links-are-flapping-on-Summi...

Cheers.

[Ian_Worms]

Hi Martin,

I am having the same issue, just wanted to check what the out come from Extreme TAC was. If possible could you provide some type of feedback.

Thanks
Ian

[Anonymous]

Hi Bill,

That's correct. Unfortunately the GTAC process is going to be slow and difficult, which I can explain offline if you need to know more.

I'm hoping to get some quick answers or some things I can try, any logging I can turn on to capture the issue, any known bugs, recommend versions of firmware etc

That type of thing would be really appreciated.

Many thanks,

Martin