Hi. I need the OID value of 5520-12MW-36W equipment at the request of the client, but there is an ambiguous part, so I will ask. The OS is XOS 31. And the required OID is "module state" !!!The "show slot" command does not work on the 5520 device, an...
Good afternoon. I've had 2 or 3 experiences with this issue, so it's more than a one-off, but still, I can't find an answer. When I connect an EnGenius switch (cloud managed, 8 port or 24 port in my examples) to an Extreme, the extreme starts droppin...
Hi SirsI search the datasheet , the EXOS switch support 802.azbut I search the other competitor datasheet , it shows 802.3az .I google 802.3az and 802.az , they both show EEE standard , but almost 802.3az Could you please explain what is different ?
We also had 1 more problem that needed urgent handling as follows:- Topology as shown, Laptop 1 (ip vlan 46), laptop2 (ip vlan 47).- Laptop 1 and laptop 2 ping at the same time to the gateway at switch 1, the packet drops continuously.- Every time la...
I've setup GNS3 and have the Extreme images loaded. When I create a new switch and configure it to utilize 65 ports, only 32 are listed when I console into the switch. GNS allows me to make link connections however it is not reflected in the switch...
