MPLS Kernel error 16.1.3.6

[Sergey_Vekli]

VPLS VPN not working. After disabling see error

MPLS gport resolve failed for unit = 0 vpn = 0x70e3, port = 0xffffffff vp = 0x18000a0c, rv = -7 (Entry not found)08/30/2016 11:37:25.99
extreme_mpls_del_vp_nh_xref: MPLS ECMP NH vp : 0xa0c l3intf = 0x83f map entry not found in btree rv = -7 (Entry not found)
extreme_custom_mpls_l2vpn_port_del: MPLS port delete: vp: 0xa0c l3Intf = 0x83f map entry not found in btree rv = -7 (Entry not found)
MPLS bcm_mpls_port_del failed for unit = 0 vpn = 0x70e3, vp = 0x18000a0c rv = -7 (Entry not found)


after enabling
* MPLS: bcm_mpls_port_add failed for unit = 0 vpn = 0x70e3, port = 0x8000809 vp = 0x18000a0d, rv = -14 (No resources for operation)

sh ver
Switch : Rev 12.0 BootROM: 2.0.2.1 IMG: 16.1.3.6

Image : ExtremeXOS version 16.1.3.6 16.1.3.6-patch1-9 by release-manager
on Mon Jul 18 10:45:49 EDT 2016
BootROM : 2.0.2.1
Diagnostics : 6.4

sh switch

System Type: X670-48x

Same problem resolved on previous release ?
https://extremeportal.force.com/ExtrArticleDetail?an=000063617

[Necheporenko__N]

MPLS kernel message you have faced logged due to unavailability of hardware resources it is similar to the another article that you have mentioned, but in that case issue appears after changing dot1q tag (include/exclude), so it is not the same issue for sure.
Also it is not clear what interface/protocol you have disabled/enabled.

In a case when your services are affected after the issue try to removed/re-add service VLAN to VPLS as a workaround for restoring connectivity.