ExtremeSwitching (EXOS/Switch Engine) - Page 256 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! EXOS how to reset a port to factory default

Is there a way to reset a port back to factory default. For instance if I have a port with 7 vlans tagged and 1 untagged with elrp on the port, how can I get the port back to just vlan default untagged without having to delete each vlan manually a...

Resolved! EXOS does not attempt RADIUS authentication with Secondary server.

At the moment I have a problem where a group of Extreme switches configured to use RADIUS authentication do not automatically attempt authentication with the secondary server when the primary server is down. I have been able to replicate this problem...

Resolved! EXOS MLAG/LACP question / clarification

I'm trying to get a clearer understanding of when to use MLAG with LACP and when not. I did read the note in https://extremeportal.force.com/ExtrArticleDetail?an=000079895 that reads "if the downstream device (e.g. switch, server, etc..) is using LAC...

how to check POE ports in summit switch x450 by command

how to check POE ports in summit switch x450 by command because below command is not working in summit x450 show inline-power show inline-power configuration ports show inline-power info detail ports show inline-power stats ports

Flow control issue

Hi, we are using EXOS version 22.5.1.7_patch1_3 switch x620 16p. we have tried to enable flow control in the switch, and we can see the AN complete with flow control enable. we enable the tx_pause frames in one port, and from some reason we can se...

Top Kudoed Authors

User

Count

28

26

18

18

17

GTM-P2G8KFN