MPLS Kernel error 16.1.3.6

[Sergey_Vekli]

VPLS VPN not working. After disabling see error

MPLS gport resolve failed for unit = 0 vpn = 0x70e3, port = 0xffffffff vp = 0x18000a0c, rv = -7 (Entry not found)08/30/2016 11:37:25.99
extreme_mpls_del_vp_nh_xref: MPLS ECMP NH vp : 0xa0c l3intf = 0x83f map entry not found in btree rv = -7 (Entry not found)
extreme_custom_mpls_l2vpn_port_del: MPLS port delete: vp: 0xa0c l3Intf = 0x83f map entry not found in btree rv = -7 (Entry not found)
MPLS bcm_mpls_port_del failed for unit = 0 vpn = 0x70e3, vp = 0x18000a0c rv = -7 (Entry not found)


after enabling
* MPLS: bcm_mpls_port_add failed for unit = 0 vpn = 0x70e3, port = 0x8000809 vp = 0x18000a0d, rv = -14 (No resources for operation)

sh ver
Switch : Rev 12.0 BootROM: 2.0.2.1 IMG: 16.1.3.6

Image : ExtremeXOS version 16.1.3.6 16.1.3.6-patch1-9 by release-manager
on Mon Jul 18 10:45:49 EDT 2016
BootROM : 2.0.2.1
Diagnostics : 6.4

sh switch

System Type: X670-48x

Same problem resolved on previous release ?
https://extremeportal.force.com/ExtrArticleDetail?an=000063617

[Sergey_Vekli]

Yes. Ospf flap was before first mpls error in log. Down due to BFD path down.

8/30/2016 03:44:37.98 MPLS: bcm_mpls_port_add failed for unit = 0 vpn = 0x7055, port = 0x800080a vp = 0x180005c7, rv = -14 (No resources for operation)
08/30/2016 03:44:37.98
08/30/2016 03:44:37.98 MPLS: bcm_mpls_port_add failed for unit = 0 vpn = 0x7054, port = 0x800080a vp = 0x180005c6, rv = -14 (No resources for operation)
08/30/2016 03:44:37.98
08/30/2016 03:44:37.98 MPLS: bcm_mpls_port_add failed for unit = 0 vpn = 0x7053, port = 0x800080a vp = 0x180005c5, rv = -14 (No resources for operation)
08/30/2016 03:44:37.98
08/30/2016 03:44:37.98 MPLS: bcm_mpls_port_add failed for unit = 0 vpn = 0x7052, port = 0x800080a vp = 0x180005c4, rv = -14 (No resources for operation)
08/30/2016 03:44:37.84 Changing the state of neighbor rtid 10.16.0.1 ipa 10.16.248.10 to state = FULL due to Loading done.
08/30/2016 03:44:37.84 Changing the state of neighbor rtid 10.16.0.1 ipa 10.16.248.10 to state = LOADING due to exchange done event.
08/30/2016 03:44:37.83 Changing the state of neighbor rtid 10.16.0.1 ipa 10.16.248.10 to state = EXCHANGE due to negotiation done event.
08/30/2016 03:44:36.86 Changing the state of neighbor rtid 10.16.0.1 ipa 10.16.248.10 to state = EX_START due to AdjOK event.
08/30/2016 03:44:35.86 Changing the state of neighbor rtid 10.16.0.1 ipa 10.16.248.10 to state = 2WAY due to two way event.
08/30/2016 03:44:35.86 Changing the state of neighbor rtid 10.16.0.1 ipa 10.16.248.10 to state = INIT due to hello received.
08/30/2016 03:44:35.86 Changing the state of neighbor rtid 10.16.0.1 ipa 0.0.0.0 to state = DOWN due to new neighbor.
08/30/2016 03:44:35.59 Changing the state of neighbor rtid 10.16.0.1 ipa 10.16.248.10 to state = DOWN due to BFD path down.
08/30/2016 03:32:52.66 Changing the state of neighbor rtid 10.16.16.1 ipa 10.16.248.5 to state = FULL due to Loading done.
08/30/2016 03:32:52.66 Changing the state of neighbor rtid 10.16.16.1 ipa 10.16.248.5 to state = LOADING due to exchange done event.

[Chad_Smith1]

Sergey,

There is a known issue that this could be related to. However, this could also be a new issue. I think it is best to open up a GTAC case for investigation.

[Chad_Smith1]

Sergey,

Did the VPN problem start after a network failure or OSPF neighborship loss?

It is probably best to open a case with GTAC so that this can be analyzed.

How to contact Extreme Networks Global Technical Assistance Center (GTAC)

[Sergey_Vekli]

We already try to delete and create same vpls but problem is not disappear.

[Sergey_Vekli]

Can you explain where in message info about vlan problem?
Now we planned downgrade to 16.1.3.6-1-8.