It looks like I do have an issue with configuration of ntp on the outband interface.
ntp is configured with peer IPs but it stucks still in INIT.
reason seems to be enable ntp on vlan MGMT which has an IP but this is not recognised by enable vlan.
* CPE_switch_2_id_2.25 # show configuration | include ntp
# Module ntp configuration.
enable ntp
configure ntp server add 192.168.5.10
configure ntp server add 192.168.5.9
* CPE_switch_2_id_2.26 # enable ntp vlan "Mgmt"
Error: VLAN Mgmt is not assinged with IP address.
* CPE_switch_2_id_2.27 # show "Mgmt"
VLAN Interface with name Mgmt created by user
Admin State: Enabled Tagging: 802.1Q Tag 4095
Description: Management VLAN
Virtual router: VR-Mgmt
IPv4 Forwarding: Disabled
IPv4 MC Forwarding: Disabled
Primary IP: 192.168.4.29/24
IPv6 Forwarding: Disabled
IPv6 MC Forwarding: Disabled
IPv6: None
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disabled
NetLogin: Disabled
OpenFlow: Disabled
QosProfile: None configured
Flood Rate Limit QosProfile: None configured
Ports: 1. (Number of active ports=1)
Untag: Mgmt-port on Mgmt is active
