ExtremeSwitching (EXOS/Switch Engine) - Page 511 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Upgrading to 16.x.x.x version?

Good day all! We're looking to upgrade several of our X430 and X440 Summits from 15.3.1.4 to one of the lastest 16.x.x.x versions. Any gotchas that anyone has experienced making that big of a jump? Any suggestions on a stable 16.x.x.x version? None a...

Dual-Hash Recursion Level value set to 100

In what might be a long thread about our multi-casting situation....my first question is when I do sho for con why does our value show 100 when the only configurable options are 0-3? sh for con L2 and L3 Forwarding table hash algorithm: Configu...

Can i Change the PoE Class from 4 to 3

Hi, I have IP cameras that are running at Class 4 power (which are not working) I have IP cameras that are running at Class 3 power (which are working) Any idea if i can stop auto negotiate the power settings and change class? Thanks

Correct rule to allow DHCP in ACL for a VLAN

Hello, everybody! I need to allow DHCP traffic for a certain VLAN in ACL. Is my rule correct? entry DHCP { if { protocol udp ; destination-port 67,68 ; } then { permit ; } } Should it be applied to VLAN as "i...

EXOS DHCP Address Limit

We have sometimes problems with SecureStack (B5) as local DHCP server (at branches). As is i learned today in the GTAC KB: SecureStack Stops Providing DHCP Addresses There is a limit of 256 IPs per Switch ! (not per VLAN) This can explain my probl...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN