OSPF Design over MLAG

[Sulaiman__Yelde]

Hi,
I'm putting up a design, and planning to use OSPF between Firewall (Edge) and Extreme X670 switches (Core).

I'm clear about the Firewall part (going to cluster the Firewalls).

have been looking for a Document on how to configure OSPF on two Extreme Switches in MLAG.

What is the best Practice to configure OSPF over MLAG Pair?
Is there a Document the explains how to do such configuration?

My plan is use the Internal Network downstream X670 as Area 0, and x670 upstream facing the Firewalls as area 10 (e.g).

Am going on the write track, or there's a better way to design such setup?

please let me know if you need more information form me?

Thanks again
Sulaiman

[Patrick_Voss]

You are not routing on the Extreme Switches?

[Yusuf_Kabbara]

Hello@Patrick Voss

What do you mean by "utilize the VLAN to create the adjacency between OSPF routers."

in such senario the two configured switches aren't treated as routers, and by the way... does Extreme support routed ports on switches "like on cisco _no switchport_ command does" ??

Thanks

[Patrick_Voss]

I would ignore the fact that MLAG is configured and utilize the VLAN to create the adjacency between OSPF routers. There isn't anything special that needs to be done while configuring OSPF on top of MLAG peers.

[Sulaiman__Yelde]

yes they do