power BD 8810

[EMO]

if I use DC power Supply (Model number 60021/PS 2350) for BD 8810 Switch

but power source availibal in the site is only AC

what is the power converter suitable for this situation , Thanks in advance .

[Gabriel_G · Accepted solution]

Hello,

Any standard AC to 48V DC converter should work as long as your power source can provide the adequate amperage for full 1200W operation.

For more details, you can check the BD8K Hardware Installation Guide which has some additional information about the PSUs and the appropriate wiring. https://documentation.extremenetworks.com/blackdiamond8800/downloads/8000_Series_Hardware_Install_Gu...