problem with Config Booted on summit x450-g4

[Salvador_Gallo]

when i configured switch this save configuration but if the switch reboot lost the configuration, i can see this configuration in the switch:

information on SW
####################
Slot: Slot-1 * Slot-2 ------------------------ ------------------------
Current State: MASTER BACKUP (In Sync)

Image Selected: secondary secondary
Image Booted: secondary secondary
Primary ver: 16.1.0.18 16.1.0.18
Secondary ver: 22.1.1.5 22.1.1.5

Config Selected: primary.cfg
Config Booted: Factory Default

primary.cfg Created by ExtremeXOS version 22.1.1.5
577404 bytes saved on Fri Jan 13 20:33:50 2017

[Patrick_Voss]

In what order?

[Salvador_Gallo]

is all

[Patrick_Voss]

Hello Salvador,

Can you explain the order of events? Config, Bootrom, Reboot?

unconfigure switch all will factory restore the configuration in exos. This is assuming you can login.

[Salvador_Gallo]

i need to restore to factory and in enterasys this was the procedure and i suppose that the process was the same

[Patrick_Voss]

Can you explain to me why the bootrom was accessed? Was this after it didn't boot into the config or before?