Removing OSPF routerid on VR-Default

[galimuna]

Hi,

I have a X460-G2 Switch which has 2 VRs configured on it and by mistake I configured a routerid on the VR-Default. Now, I am trying to remove the routerid from the VR-Default and leave only the VR-Production where it should be (this is the only VR that does OSPF on the Switch) and I couldn’t find anything until now. Does anyone had a similar issue? or does anyone have an idea how I could remove the routerid?

thanks in advance

[Miguel-Angel_RO]

Galimuna,

Please mark the post as solved with the best answer option to close it.

Thanks

Mig

[galimuna]

Hi Miguel-Angel,

yes, it worked! thanks alot.

Best Regards

[Miguel-Angel_RO · Accepted solution]

Galimuna, Stephan,

The default behaviour of the EXOS is to use an automatic routerid asignement, so put it back as such with configure ospf routerid automatic

Example on GNS3:

* EXOS-VM.6 # configure ospf routerid 10.174.68.90

* EXOS-VM.7 # show conf ospf

#

# Module ospf configuration.

#

configure ospf routerid 10.174.68.90

* EXOS-VM.8 # configure ospf routerid automatic 

* EXOS-VM.9 # show conf ospf

#

# Module ospf configuration.

#

* EXOS-VM.10 # 

Let me know,

Mig

[Stefan_K_]

Hi Mig,

I thought the same and just tested it. There is no unconfigure, delete or disable command to clear the router ID. Now I’m also a bit confused. 😄 

Best regards
Stefan