routing between vlan
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-22-2018 09:27 AM
Hi! i have extreeeme 440t-g2-10ge. and this vlan cfg.
Default 1 10.1.5.254 /21 -f----------T--------------- ANY 7 /19 VR-Default
GuestWiFi1111 1111 10.111.111.2 /24 ---------------------------- ANY 3 /3 VR-Default
Mgmt 4095 10.1.5.151 /8 ---------------------------- ANY 0 /1 VR-Mgmt
PrintersVLAN 10 10.1.10.1 /23 -f-------------------------- ANY 3 /4 VR-Default
VoIPVLAN 20 10.1.20.2 /23 ---------------------------- ANY 3 /3 VR-Default
ServersVLAN 30 10.1.30.2 /23 ---------------------------- ANY 2 /2 VR-Default
and this route cfg
#s 10.1.0.0/16 10.1.5.31 1 UG---S-um--f- Default 135d:3h:28m:18s
#d 10.1.0.0/21 10.1.5.254 1 U------um--f- Default 156d:23h:3m:9s
#d 10.1.10.0/23 10.1.10.1 1 U------um--f- PrintersVLAN 140d:2h:42m:41s
#d 10.1.20.0/23 10.1.20.2 1 U------um--f- VoIPVLAN 0d:2h:56m:39s
#d 10.1.30.0/23 10.1.30.2 1 U------um--f- ServersVLAN 27d:21h:40m:15s
if I connect to the port (untagged) a laptop on which there is a server (VLAN), then it will receive settings for dhcp, but does not ping the gateway (VLAN interface). Accordingly, no equipment is pinged further either. How to solve this problem. Before I installed the latest firmware, everything worked. I don’t want to return the old one. There was a slower functioning web interface.
help me please!!!
Default 1 10.1.5.254 /21 -f----------T--------------- ANY 7 /19 VR-Default
GuestWiFi1111 1111 10.111.111.2 /24 ---------------------------- ANY 3 /3 VR-Default
Mgmt 4095 10.1.5.151 /8 ---------------------------- ANY 0 /1 VR-Mgmt
PrintersVLAN 10 10.1.10.1 /23 -f-------------------------- ANY 3 /4 VR-Default
VoIPVLAN 20 10.1.20.2 /23 ---------------------------- ANY 3 /3 VR-Default
ServersVLAN 30 10.1.30.2 /23 ---------------------------- ANY 2 /2 VR-Default
and this route cfg
#s 10.1.0.0/16 10.1.5.31 1 UG---S-um--f- Default 135d:3h:28m:18s
#d 10.1.0.0/21 10.1.5.254 1 U------um--f- Default 156d:23h:3m:9s
#d 10.1.10.0/23 10.1.10.1 1 U------um--f- PrintersVLAN 140d:2h:42m:41s
#d 10.1.20.0/23 10.1.20.2 1 U------um--f- VoIPVLAN 0d:2h:56m:39s
#d 10.1.30.0/23 10.1.30.2 1 U------um--f- ServersVLAN 27d:21h:40m:15s
if I connect to the port (untagged) a laptop on which there is a server (VLAN), then it will receive settings for dhcp, but does not ping the gateway (VLAN interface). Accordingly, no equipment is pinged further either. How to solve this problem. Before I installed the latest firmware, everything worked. I don’t want to return the old one. There was a slower functioning web interface.
help me please!!!
9 REPLIES 9
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-23-2018 10:12 AM
i dont have acl on this swich. i chenged firmware bacause i need cablediag!
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-23-2018 09:40 AM
Hi,
1) You changed firmware on extreme ? If yes what is new ver. and what was the old one ?
2) If you have ACL, check if they are all applied after upgrade.
3) On mikrotik you have packet analyser for example torch.
Run it on the interface and check if you see any packet from computer/test host,etc.
--
Jarek
1) You changed firmware on extreme ? If yes what is new ver. and what was the old one ?
2) If you have ACL, check if they are all applied after upgrade.
3) On mikrotik you have packet analyser for example torch.
Run it on the interface and check if you see any packet from computer/test host,etc.
--
Jarek
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-23-2018 04:22 AM
I can say that now from 10.1.31.254 (computer) I ping 10.1.30.2 (extreeme), but I do not ping 10.1.30.1 (mikrotik), from the default VLAN I ping 10.1.30.1-10.1.30.4 (mikrotik-extreeme)
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎11-22-2018 12:38 PM
Yes, you understand me correctly. The address of the phone and computer comes to the arp table, but these addresses are not responding to the extreme.
