Show Port with VLAN name instead of # of VLANs

[Terren_Crider]

I have EXOS 21.1. I would like to know if there is any way to get the output of show port to show all of the VLAN names instead of the number of VLANs on a port? If there is a single VLAN, it shows the name, but just knowing the number of VLANs assigned to a port doesn't really do me any good.

Port Display VLAN Name Port Link Speed Duplex
# String (or # VLANs) State State Actual Actual
=======================================================================
1:1 (0002) E A 1000 FULL
1:2 (0002) E R
1:3 (0002) E R
1:4 (0002) E R

[Terren_Crider]

The only issue is that I need to see all of them. Doing this one by one is very tedious and not really feasible when dealing with more than a couple of switches.

[Patrick_Voss]

If you do "show vlan port 1" it will only display the VLANs added to port 1.

[Terren_Crider]

This one doesn't show me which ports exactly. Only that x number of ports are in each VLAN.

[Evan_Kuckelheim]

Like this

* X-460G2-Testing.3 # show ports 1-4 vlan
Untagged
Port /Tagged VLAN Name(s)
-------- -------- ------------------------------------------------------------
1 Untagged None
Tagged KLS_VOICE, NAC
2 Untagged KMS_WIRED
Tagged NAC
3 Untagged EXTREME_WIRELESS_MANAGEMENT
Tagged NAC
4 Untagged KMS_WIRED
Tagged NAC
* X-460G2-Testing.4 #

[Evan_Kuckelheim]

Hmm odd must be a new command on v22.
I'm running 22.2.1.5 patch1-4