ExtremeSwitching (EXOS/Switch Engine) - Page 315 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Problem with SG5201-0848-F6 core switch FUJI TXQ MAIN intr

Today i found in logs with messages on my core switch can someone help me whats the problems i have 2 boned chassis switches. Sep 15 03:24:53 10.10.7.254 Fuji[2.tNimIntr]Fuji TXQ MAIN intr: Fuji=1, Adr=0, Reg=0x00000021 (Adr 31 = 0x1509634F, Adr 32 =...

Can I add acl (block mac address or allow mac address) on snmp

I want to block mac address or I want to allow blocked mac address on SNMP agent Can I do this via snmp ?

Some ports don't link up

Hi, all! X440G2-48t-10G4 Upgraded to recommended EXOS 21.1.5.2 patch 1-2 Diagnostic is passing normal. In logs no any problems. But ports 8, 12, 38, 39, 45, 46 isn't go up when connect some device. Other ports normally working. Tried to del from d...

MPLS route is still active in routing table even its corresponding OSPF route is not listed

Hi There, I found MPLS route is still active in routing table even its corresponding OSPF route is not listed in routing table. Ori Destination Gateway Mtr Flags VLAN Duration mp 192.17.80.55/32 172.17.79.1 ...

Configure a list of allowed mac addresses on a wifi vlan using Summit switches. xos 16.2.4.5-patch1-8

Configure a list of allowed mac addresses on a wifi vlan using Summit switches. I want to use our 460 core switch to allow a list of macaddreses on a single vlan and have not been able to build an acl.

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN