Single EAPS ring, master node in INIT fail time-out

[Massimiliano_T1]

Master node goes in INIT status fail time out.

I have a single ring with a correct VLAN data mapping, VLAN control and no storm(broadcast).
If I use specific ports master node goes in Complete or Failure(if rings open) and It means that PDU for Healt Check, Link UP or DOWN is running.
If I use other ports with same VLAN master node in the ring goes in INIT fail time-out

I need to know how to investigate issue and kind of potential root causes

[Senguttuvan__Ar]

Did you make sure the other ports you used had the control VLAN assigned to it and also the EAPS primary and secondary ports are re-configured pointing the new ports.

[Bill_Stritzinge]

Based on what you are saying I would use the command "debug EAPS check config" and report the output please.