SNMP Error #2003

[Ghost1081]

Hello togehter,

i have an extreme switch an would like to use snmp.
my snmp config looks like this:

problem is:
my snmp test tool says: Error #2003
What can i do now?

[Ghost1081]

you mean:

Remove: configure snmp DELETE community readonly public
Add: configure snmp add community readonly public

My result of the delete command:

My result of the add command:

i don't unterstand, why one version of public is always available oO

[Ariyakudi_Srini]

Hi,

I tried a few combination to arrive at the configuration as the switch you have with SNMP issue but could not.

But you can use the below command to remove and add the community "public" and check at the screenplay.

Remove: configure snmp add community readonly public
Add: configure snmp add community readonly public

If you want, you can remove and add it to the switch and check.
But my attempt to get the community public with no string at "Read View" was not successful.

[Ghost1081]

one question, before i will open a case.
maybe this helps:

left: switch with snmp problem
right: perfect switch

- on both switchs are the same three communitys
but with the difference:

left: public has no value in column read view, but has a value in read view of the thrid community

right: public has a value in column read view, but has not a value in read view of the third community

can this be the problem?
anf if yes: how can i set this settings like the left switch?

[Ariyakudi_Srini]

Hi,

From the switch configuration, i don't see any access list configured but the log speaks otherwise.

Please open a case with GTAC to have this further troubleshot.