I am newer to the exos line and I am curious if the QSFP form factor ports in the rear of the x450-g2 can be used to connect with standard QSFP ports to non-exos switch with QSFP ?
thanks,
Jake
Hey everyone!
Since Microsoft allowed the Hyper-V switches to transfer EAPOL packets I tried to make our switches more secure by implementing 802.1x authentication for the ports.
My idea is the next:
Someone plugs their computer to one of the swit...
Hi all,
I need to clarify a question regarding Extreme stack with ISC cable. let's say we have two X460G2 switches in a stack. One is Master and the second is Backup or Standby.
If we have end devices plugged in to the switches which are not maste...
Posting this question here because the 'Switching Routing' sub forum didn't return any replies.
We have 2 switch models (x460, x670) in our environment that are running 10Gb SFP+.
My one problem I have with them is that these are fairly large in s...
I configured two port in aggregation between a X440G2-24t-G4 and a Moxa EDR 810 both in static mode.
Everything seems working fine but the two ports of the Extreme switch negotiate in half-duplex (with show port information). However Moxa shows his t...
