Create Date: Aug 26 2013 2:02AM
Hello all. I recently enabled SNMP on my Extreme switches, and its been working great but I am getting flooded with these syslog messages:
08/25/2013 12:32:48.26 Login failed through SNMPv1/v2c - bad community name (10.253.4.107)
10.253.4.107 is the IP of my SNMP server.
Here is the config on the switch
AACCAMUR-Extr1.1 # sho config snmp
#
# Module snmpMaster configuration.
#
configure snmpv3 add community SNMP44C name SNMP44C user v1v2c_ro
AACCAMUR-Extr1.2 #
Here is show management, dunno if it's helpful in this situation:
AACCAMUR-Extr1.6 # sh management
CLI idle timeout : Enabled (20 minutes)
CLI max number of login attempts : 3
CLI max number of sessions : 8
CLI paging : Enabled (this session only)
CLI space-completion : Disabled (this session only)
CLI configuration logging : Enabled
CLI scripting : Disabled (this session only)
CLI scripting error mode : Ignore-Error (this session only)
CLI persistent mode : Persistent (this session only)
CLI prompting : Disabled (this session only)
Telnet access : Enabled (tcp port 23 vr all)
: Access Profile : not set
SSH Access : ssh module not loaded.
Web access : Enabled (tcp port 80)
: Access Profile : not set
Total Read Only Communities : 1
Total Read Write Communities : 1
RMON : Disabled
SNMP access : Enabled
: Access Profile : not set
SNMP Traps : Enabled
SNMP v1/v2c TrapReceivers : None
SNMP stats: InPkts 88616 OutPkts 74143 Errors 0 AuthErrors 12209
Gets 43601 GetNexts 45 Sets 0 Drops 0
SNMP traps: Sent 0 AuthTraps Enabled
SNMP inform: Sent 0 Retries 0 Failed 0
I've configured SNMP on a variety of devices and never seen a message like this before, can anyone help? Thank you in advance! (from sqone2)
