Stacking time different on slot 2

[Ian_Worms]

Hi,

We have three switches in a stack, slot 1, slot 2 and slot 3. The time is the same on slot 1 and slot 3 if a telnet to slot 1 and slot 3 and show switch. But if I telnet to slot 2 and do a show switch the time is different and there is no time zone.

How do I sync the time between all three slots?

Thanks
Ian

[davidj_cogliane]

Yes, the switch in question failed twice this past week. I can not say if the time difference was a cause or a symptom though.

Were you able to correct the time the same way I did?

[Ian_Worms]

Hi,

Did you have any issue with slot failures while you had different times on the slots?

Thanks
Ian

[davidj_cogliane]

I encountered the same problem last night. I configured the time on the master and saved. I checked the time on slot 3 again and it was synced. I am curious as to why the time was off though?