Stacking time different on slot 2

[Ian_Worms]

Hi,

We have three switches in a stack, slot 1, slot 2 and slot 3. The time is the same on slot 1 and slot 3 if a telnet to slot 1 and slot 3 and show switch. But if I telnet to slot 2 and do a show switch the time is different and there is no time zone.

How do I sync the time between all three slots?

Thanks
Ian

[JHONN_WILLIAM_B]

Hi Brad,

What recomendation should I follow, do I have to do an upgrade to 16.1.1 or a downgrade?

[BradP]

Hi Jhonn,

15.7.2 came out after your 15.7.1 patch 1-2 so that would be the version that I would recommend. As always, with any version of code, it should be tested in a pre-production environment and then rolled out when sufficient testing has been completed in order to help mitigate against any unforeseen circumstances.

Brad

[BradP]

Hi Jhonn,

The defect has been resolved in the following versons:

• EXOS 16.1.1
• EXOS 15.7.2
• EXOS 15.6.2 Patch 1
• EXOS 15.5.4

[JHONN_WILLIAM_B]

Hi, I have 4 switches Summit X460 in stack mode, master and backup are time synchronized but the other stanby nodes are out of time. I use the version 15.7.1.4 patch1-2. what action do I have to do in order to fix this?