Hello. the problem is that We cant make the second erps ringconfigure erps Ring-2 add control vlan v30
configure erps Ring-2 ring-port east 1:5
configure erps Ring-2 ring-port west 2:5
configure erps Ring-2 protection-port 2:5
enable erps Ring-2
configure erps Ring-2 add protected vlan v4
configure erps Ring-2 add protected vlan v31
this one is ok!
Now we are making the second ring - on other ports of summit x670
* Slot-1 Stack.3 # create erps Ring-1
* Slot-1 Stack.4 # configure erps Ring-1 add control vlan v20
* Slot-1 Stack.5 # configure erps Ring-1 ring-port east 1:25
Error: Current switch license level does not allow to configure the use of more than two ring ports
Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.6 # configure erps Ring-1 ring-port west 2:25
Error: Current switch license level does not allow to configure the use of more than two ring ports
Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.7 # configure erps Ring-1 protection-port 2:25
Error: Ring ports for "Ring-1" not configured
Error: Configuring Port 2:25 on ring Ring-1 failed
Configuration failed on backup Node, command execution aborted!
матерится на лицензию, вот
Here our license
Slot-1 Stack.4 # sh lic
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
None
Effective License Level:
Advanced Edge
из
in datasheet we can se that 32 erps rings can be done
Table 5: ExtremeXOS Advanced Edge License Features
ExtremeXOS Software Feature
Supported Platforms
EAPS Advanced Edge (multiple physical rings)
All platforms.
ERPS-more domains (allows 32 rings with matching ring ports)
All platforms.
and multi-ring support