summit x670-48 erps rings in differ ports
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
07-28-2016 08:52 AM
Hello. the problem is that We cant make the second erps ringconfigure erps Ring-2 add control vlan v30
configure erps Ring-2 ring-port east 1:5
configure erps Ring-2 ring-port west 2:5
configure erps Ring-2 protection-port 2:5
enable erps Ring-2
configure erps Ring-2 add protected vlan v4
configure erps Ring-2 add protected vlan v31
this one is ok!
Now we are making the second ring - on other ports of summit x670
* Slot-1 Stack.3 # create erps Ring-1
* Slot-1 Stack.4 # configure erps Ring-1 add control vlan v20
* Slot-1 Stack.5 # configure erps Ring-1 ring-port east 1:25
Error: Current switch license level does not allow to configure the use of more than two ring ports
Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.6 # configure erps Ring-1 ring-port west 2:25
Error: Current switch license level does not allow to configure the use of more than two ring ports
Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.7 # configure erps Ring-1 protection-port 2:25
Error: Ring ports for "Ring-1" not configured
Error: Configuring Port 2:25 on ring Ring-1 failed
Configuration failed on backup Node, command execution aborted! матерится на лицензию, вот
Here our license
Slot-1 Stack.4 # sh lic
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
None
Effective License Level:
Advanced Edge из
in datasheet we can se that 32 erps rings can be done
Table 5: ExtremeXOS Advanced Edge License Features
ExtremeXOS Software Feature
Supported Platforms
EAPS Advanced Edge (multiple physical rings)
All platforms.
ERPS-more domains (allows 32 rings with matching ring ports)
All platforms.
and multi-ring support
configure erps Ring-2 ring-port east 1:5
configure erps Ring-2 ring-port west 2:5
configure erps Ring-2 protection-port 2:5
enable erps Ring-2
configure erps Ring-2 add protected vlan v4
configure erps Ring-2 add protected vlan v31
this one is ok!
Now we are making the second ring - on other ports of summit x670
* Slot-1 Stack.3 # create erps Ring-1
* Slot-1 Stack.4 # configure erps Ring-1 add control vlan v20
* Slot-1 Stack.5 # configure erps Ring-1 ring-port east 1:25
Error: Current switch license level does not allow to configure the use of more than two ring ports
Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.6 # configure erps Ring-1 ring-port west 2:25
Error: Current switch license level does not allow to configure the use of more than two ring ports
Configuration failed on backup Node, command execution aborted!
* Slot-1 Stack.7 # configure erps Ring-1 protection-port 2:25
Error: Ring ports for "Ring-1" not configured
Error: Configuring Port 2:25 on ring Ring-1 failed
Configuration failed on backup Node, command execution aborted! матерится на лицензию, вот
Here our license
Slot-1 Stack.4 # sh lic
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
None
Effective License Level:
Advanced Edge из
in datasheet we can se that 32 erps rings can be done
Table 5: ExtremeXOS Advanced Edge License Features
ExtremeXOS Software Feature
Supported Platforms
EAPS Advanced Edge (multiple physical rings)
All platforms.
ERPS-more domains (allows 32 rings with matching ring ports)
All platforms.
and multi-ring support
16 REPLIES 16
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
07-28-2016 11:22 AM
thanks, but in https://esupport.extremenetworks.com/eservice_enu/start.swe?SWECmd=Login&SWEPL=1&_sn=xXo.-fB...
only those
Downloads 1 - 122 of 122 Release NameAvailable DownloadsExtremeXOS 15.1.2.127 filesExtremeXOS 15.1.2.12 Patch1-27 files
and no any of 16.1.3.6-patch1-7
only those
Downloads 1 - 122 of 122 Release NameAvailable DownloadsExtremeXOS 15.1.2.127 filesExtremeXOS 15.1.2.12 Patch1-27 files
and no any of 16.1.3.6-patch1-7
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
07-28-2016 11:22 AM
Please see the Article below:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Obtain-and-Upgrade-EXOS
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Obtain-and-Upgrade-EXOS
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
07-28-2016 11:22 AM
Yes, We have two x670 in stack mode
Please, tell where can I get 16.1.3.6-patch1-7 ?
Please, tell where can I get 16.1.3.6-patch1-7 ?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
07-28-2016 11:22 AM
The recommended release for X670s is EXOS 16.1.3.6-patch1-7. Last available patch is 1-8.
Are you using all stack members as X670's or you have other switch models in that stack? That's important before upgrading the unit due to some limitations
Are you using all stack members as X670's or you have other switch models in that stack? That's important before upgrading the unit due to some limitations
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
07-28-2016 11:17 AM
Hi Roman, you need to upgrade to a newer EXOS code do have ERPS-Full when using Adv. Edge license.
I'm confirming for what EXOS release this was changed.
I'm confirming for what EXOS release this was changed.
