TTL expired in transit!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-13-2018 03:16 AM
Hi Friends,
Good day.
I have problem with Inter-Vlan.
Our goal is PC1 must communicate to PC2 with different VLANs. same as PC2 to PC1.
We followed this link below as guide. https://extremeportal.force.com/ExtrArticleDetail?an=000083610
But seems inter-VLAN is not working because PC1 not successfully PING the PC2, same as PC2 to PC1. When we tried to ping each PC the ping is "TTL expired transit". but zero packet loss.
We tried this set up to our X440-G2. with the same configurations with the above GTAC link guide.
Thanks,
Resolut1on
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-17-2018 12:31 AM
Good day!
I give you update.
Now I can ping from both PC1 and PC2 the both gateway.
But PC1 and PC2 cannot yet ping each other.
PC1 10.10.10.10 can PING 10.10.10.1 and 20.20.20.1
PC2 20.20.20.20 can PING 20.20.20.1 and 10.10.10.1
Thanks,
Resolut1on
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-13-2018 10:52 AM
do a 'route print' on both PCs, that should show what's happening with the routing.
Paul.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-13-2018 10:52 AM
I disabled my wireless connection now. The PC1 and PC2 not on the network now. But still PC1 cannot ping PC2, same as PC2 to PC1.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎07-13-2018 10:52 AM
Can you check if there is some mis-configuration in the routing part?
show configuration "rtmgr" could be helpful here
