ExtremeSwitching (EXOS/Switch Engine) - Page 379 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to make 2 switches talk after connecting with fiber?

Hi First off, I'm very new to this, so please bear with me as I'm learning. I've tried to research this but I don't know the keywords I need. I have 2 Summit X250e-48P switches. I have managed to create a VLAN, set a DHCP scope, and connect devices...

Network redundancy in X-480 and X-670 G2 Series Switches

Hi, X-480 and X-670 G2 Series Switches support H-VPLS as mentioned in their datasheet. However, I am wondering if it support network (link or node) redundancy in case of any failure. How does the network participants (nodes) will come to know for an...

mpls over gns3 limitations

hello guys, I've been working over gns3 with EXOS_VM and some routers Cisco, so, I 'm struggling with mpls between them, which I would like to know if is it possible to exchange ldp and rsvp between them using gns3, or all configuration regarding mpl...

Small packet loss when pinging management IP of switch

I am experiencing a small packet loss (about 400 dropped packets in about 8 hr period) when pinging the ip I have assigned to a 440g2 stack. Its connected to a 460 g2 stack and no packet loss to the 460. There is also another 440g2 stack connected ...

System Memory

What is the threshold for system memory

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN