Unconfigure EAPS - Step by step

[Oscar_Javier_Ro]

Hi everybody,

I need delete all EAPS configuration, please confirm:

disable "Eaps_name_1"

unconfigure "Eaps_name_1" primary port

unconfigure "Eaps_name_1" secondary port

delete "Eaps_name_1"

that's right??

Thanks a lot!

[dflouret]

Oscar,

Just make sure, before deleting EAPS, that the ring is open, or you'll generate a nice loop in your network!

If you are not sure of the cabling status, disable the secondary port in the Master switch (which is what the EAPS master normally does...)

[Oscar_Javier_Ro]

Ok Patrick thanks a lot!

[Patrick_Voss]

You should be able to delete the EAPS name and it will remove all other configuration. This can be verified by attempting that command and then running "show config eaps"

[Oscar_Javier_Ro]

it's necessary delete vlan port member?