Vlan comunications

[Grud]

Good afternoon everyone! I am new to working with Extreme equipment and I have a problem that I cannot identify, I create vlans following this guide (https://extremeportal.force.com/ExtrArticleDetail?an=000083610) and my vlans do not communicate with each other, I couldn't find the problem and in most places I saw teaching how to create they were similar to this example in the guide. What can this problem be about the lack of communication between vlans? I'm using Extreme X440-48t to do this configuration with the vlans, I don't have any fixed address range that I have to follow, I'm just trying to solve this problem. Thanks in advance for your attention!

[Grud]

well, the routing between the computers I test with the ping command, and the two machines get a ping response from their respective gateways, each machine is on a different vlan, even this part is ok, however, when I will ping one machine on the other does not work. Follow the exit of the "show iproute". Thanks a lot for the help.

[StephanH]

Hello Grud,

how do you test the routing between the vlans?

With two computer in different vlans and ping?

If yes, what is the adapter config (ip, mask, gateway)?

Can you ping the gateway of the pcs?

Can you provid an "sh ip route" frim the x440?

[Grud]

Of course! Following is an image with "show vlan" and another with the output of "show config", but only the part of the vlan. 

[CThompsonEXOS]

Can you provide the output of “show vlan”?

Thanks,

Chris Thompson