VLAN port management command syntax

[bcyrus]

Hi all,

Newbie networking guy here

I can’t seem to nail down the syntax for our 450-series switches. I’m a Cisco guy and used to say:

1. Switchport access vlan 15
2. Switchport access voice vlan 2

That switchport is now a member of the data vlan and the voice vlan. 

What would the syntax be to achieve the same results, but on the 450-series switch?

[Gabriel_G]

Ron's got the right idea, just add the data vlan as untagged, the voice vlan as tagged. 
https://extremeportal.force.com/ExtrArticleDetail?an=000088085

Also, if your phone requires LLDP to learn it's voice VLAN, you can use these LLDP commands:
https://extremeportal.force.com/ExtrArticleDetail?an=000083139

If you're more familiar with Cisco Commands, this Command Cross-Reference may be helpful:

https://documentation.extremenetworks.com/CLI_X-Ref/1.0/CLI_X-Ref_Guide_1.0.pdf

[Ronald_Dvorak]

Hi bcyrus,

here is an example…

https://extremeportal.force.com/ExtrArticleDetail?an=000088085

-Ron