configure ports [port_list|all] monitor vlan vlan_name {rx-only | tx-only}
this command under 15.7.1.4 firmware function will fail
ex:
Current State: OPERATIONAL
Image Selected: secondary
Image Booted: secondary
Primary ver: 15.7.1.4
Secondary ver: 15.7.1.4
patch1-1
#conf port all monitor vlan sw_ rx
#sh conf | inc monitor
no any response
but if i use firmare 15.3.5
#30B-02.3 # conf port 1-2 monitor vlan sub rx
#30B-02.4 # sh conf | inc monitor
configure ports 1 monitor vlan subnet_30 rx-only
configure ports 2 monitor vlan subnet_30 rx-only
Does anyone know what happen, that is a bug or this function was cancel
if cancel why can i get this command in EXOS_Command_Reference_15_7.pdf
