cancel
Showing results for 
Search instead for 
Did you mean: 

vlan statistics

vlan statistics

Li_Ping_Hsu
New Contributor II
configure ports [port_list|all] monitor vlan vlan_name {rx-only | tx-only}

this command under 15.7.1.4 firmware function will fail

ex:

Current State: OPERATIONAL
Image Selected: secondary
Image Booted: secondary
Primary ver: 15.7.1.4
Secondary ver: 15.7.1.4
patch1-1

#conf port all monitor vlan sw_ rx
#sh conf | inc monitor

no any response

but if i use firmare 15.3.5

#30B-02.3 # conf port 1-2 monitor vlan sub rx
#30B-02.4 # sh conf | inc monitor
configure ports 1 monitor vlan subnet_30 rx-only
configure ports 2 monitor vlan subnet_30 rx-only

Does anyone know what happen, that is a bug or this function was cancel

if cancel why can i get this command in EXOS_Command_Reference_15_7.pdf

5 REPLIES 5

Bill_Stritzinge
Extreme Employee
What hardware platform are you running this on? I have tried on some other platforms with your firmware version and things seem fine, let me know and I can try to replicate.
GTM-P2G8KFN