VxLAN GW with NSX: Host move between HW-VTEPs support

[Arunkumar_Rg]

With OVSDB managed VxLAN hardware GW and NSX as controller. does extreme hardware-GWs support the host move from one HW-VTEP to another HW-VTEP??
If yes, what is the minimum supported time gap between the moves??
Example: if host moves from hw-vtep-1 to hw-vtep-2 and then it moves to hw-vtep-3. What is the minimum time gap supported between hw-vtep-2 to hw-vtep-3

[Erik_Auerswald]

Hi Arunkumar,

can you tell us more about your setup? How did you connect the NSX controller to an Extreme switch (BTW which model of switch, and which firmware version)?

Thanks,
Erik

[Arunkumar_Rg]

Hi Erik,

Right now, we are studying on the Extreme switches behavior with NSX controller.

The setup I'm looking is Extreme switch(likely x770) acting as a Hardware VxLAN gateway. So the connection method used is SSL and port 6640. OVSDB is the protocol used between controller and the HW switch.

I have also put few more details on the setup and the sequence of events on this post as a reply to Michael Ripley. Kindly requesting you to refer that for details.

Thanks,

Arun.

[Carlos_Maldonad]

Hi Arun,

I'm working with an integration between NSX controller and X690, im using ovsdb configuration, and ssl certificate but I want to know if the integration that yo do in the x670 was in an specific VR or use the VR mgmt and mgmt port?

Regards,

Carlos

[Michael_Ripley]

Hey Arunkumar,

When you say host move, are you referring to virtual machine move?

Thanks,
Mike