ExtremeSwitching (EXOS/Switch Engine) - Page 407 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

VLAN Interfaces Graph

Hi, I'm trying to graph the VLAN interfaces traffic on BlackDiamond by using SNMP based RRD tools like Zenoss, Cacti, etc. The tools can show the VLAN interfaces including the tag and name of each one but the traffic is always zero. Is there any way...

OSPF Design over MLAG

Hi, I'm putting up a design, and planning to use OSPF between Firewall (Edge) and Extreme X670 switches (Core). I'm clear about the Firewall part (going to cluster the Firewalls). have been looking for a Document on how to configure OSPF on two Ext...

What process is this, mcmgr

MSM-A mcmgr n/a n/a 6.2 38.1 33.1 32.6 32.8 45.5 175756.29 223851.09 Does anyone know what process this is ? it seems to be running high. I wonder if this could be multicast, on a different customer I rece...

X460 vs EXOS 16.2.2

Hello, colleagues!software-release-recommendations pointed that recommended version for X460-G1 is 16.2.2.4BUT had few Customers which fased with below problemhttps://extremeportal.force.com/ExtrArticleDetail?an=000057854Based on the articlehttps://c...

Stack switch fails and brings the whole LAN down

i have x440-48T Switch stacks in my Local LAN, over the last 6 months the LAN has been brought to a standstill because of a failure on a stack, both times it was a different stack. No one can connect from external the whole Network is down. We have ...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN