What is the newest firmware version for the BlackDiamond 8810?

[Eric_Jones]

What is the newest firmware version for the BlackDiamond 8810?

[Eric_Jones]

Slots Type Configured State Ports Flags-------------------------------------------------------------------------------
Slot-1 G48Te2(PoE) G48Te2(PoE) Operational 48 MB
Slot-2 G48Te2(PoE) G48Te2(PoE) Operational 48 MB
Slot-3 G48Te2(PoE) G48Te2(PoE) Operational 48 MB
Slot-4 G48Te2(PoE) G48Te2(PoE) Operational 48 MB
Slot-5 10G1Xc 10G1Xc Operational 1 MB
Slot-6 G8Xc G8Xc Operational 8 MB
Slot-7 G48Te2(PoE) G48Te2(PoE) Operational 48 MB
Slot-8 G48Te2(PoE) G48Te2(PoE) Operational 48 MB
Slot-9 G48Te2(PoE) G48Te2(PoE) Operational 48 MB
Slot-10 Empty 0
MSM-A MSM-48c Operational 0
MSM-B MSM-48c Operational 0

Flags : M - Backplane link to Master is Active
B - Backplane link to Backup is also Active
D - Slot Disabled
I - Insufficient Power (refer to "show power budget")

[Drew_C]

With that setup, you should be able to go all the way to 16.1.2 if you wanted to be on the latest firmware. As I mentioned in the thread linked above, the current recommended release for the BD8800 is listed as EXOS 15.6.3.1-patch1-5. You should know that v15.6.3.1-patch1-9 was released since that document was published and supersedes the patch1-5 recommendation it lists.

[Eric_Jones]

Ok thanks it looks like the last supported firmware version is 12.5.4.5-patch1-6(according to the available downloads), however the the switches are running 12.6.2.10. I will most likely call gtac to get more information.

[Drew_C]

Let us know if there's anything we can help you with here. If you can share the output of

code:

show slot

, someone here can help take a look at what version will be supported.