X440 IPForwarding Not Working as Expected

[Justin_Brooks]

I currently have and X440 at one of my sites that I am creating a new VLAN to add in some additional IP's. I successfully did this at another site and it worked like a charm, but this one seems to not be cooperating. I have both rip and ipforwarding enabled on the Default and the new VLAN. The Default VLAN can ping the IP of the new VLAN and the new VLAN can ping the IP of the Default VLAN, but the new VLAN can't ping any devices on the old VLAN and the old VLAN can't ping any devices on the new VLAN.

I find it odd that the same config worked at another site, but doesn't on this one. The only difference from one site to another is the IP addresses used.

[Patrick_Voss]

If it was it wouldn't let you enable ipforwarding due to the license.

[Justin_Brooks]

It's an x440-24x, where the one that I have configured exactly the same is an x440-48p. I am fairly certain that it wasn't on the list of ones that wouldn't do routing.

[Patrick_Voss]

Hello Justin,

Based on the configuration it looks like you are adding a PC to port 3 in the wifi VLAN and trying to ping from that device to other devices in the default VLAN?

If this is true is the device receiving a DHCP address from a server? if so, what is the default gateway. In this setup the default gateway would need to be the ip address of the switch it is connected to (10.1.22.210) in order to reach outside the network. Can the device ping this IP?

[Justin_Brooks]

In case it is needed, here is a copy of my show config.

#
# Module vlan configuration.
#
configure vlan default delete ports all
configure vr VR-Default delete ports 1-24
configure vr VR-Default add ports 1-24
configure vlan default delete ports 3
create vlan "PHS_WIFI"
configure vlan PHS_WIFI tag 10
enable loopback-mode vlan PHS_WIFI
configure ports 1 display-string PHS-Hall2
configure ports 4 display-string PHS-Hall1
configure ports 7 display-string PHS-Hall3
configure ports 9 display-string PHS-Nurse1
configure ports 14 display-string PHS-Office1
configure ports 15 display-string PHS-OldK
configure ports 21 display-string PHS-Core
configure ports 22 display-string PHS_WLC
configure ports 23 display-string PHS-Lib
configure ports 24 display-string To_ASC
configure ports 24 medium copper auto off speed 100 duplex full
configure vlan Default add ports 1-2,4-24 untagged
configure vlan PHS_WIFI add ports 3 untagged
configure vlan Default ipaddress 10.0.22.210 255.255.252.0
enable ipforwarding vlan Default
configure vlan PHS_WIFI ipaddress 10.1.22.210 255.255.252.0
enable ipforwarding vlan PHS_WIFI
#
# Module fdb configuration.
#
#
# Module rtmgr configuration.
#
configure iproute add default 10.0.20.3
disable iproute ipv4 compression
disable iproute ipv6 compression
#
# Module mcmgr configuration.
#
#
# Module aaa configuration.
#
#
# Module acl configuration.
#

configure access-list zone SYSTEM application Snmp application-priority 14
configure access-list zone SYSTEM application Telnet application-priority 15
configure access-list zone SYSTEM application Http application-priority 16
configure access-list zone SYSTEM application L2PT_PF application-priority 17
#
# Module bfd configuration.
#
#
# Module ces configuration.
#
#
# Module cfgmgr configuration.
#
#
# Module dosprotect configuration.
#
#
# Module dot1ag configuration.
#
#
# Module eaps configuration.
#
#
# Module edp configuration.
#
#
# Module elrp configuration.
#
enable elrp-client
configure elrp-client periodic Default ports 1-2,4-24 interval 15 log-and-trap disable-port ingress permanent
configure elrp-client disable-port exclude 1
configure elrp-client disable-port exclude 2
configure elrp-client disable-port exclude 3
configure elrp-client disable-port exclude 4
configure elrp-client disable-port exclude 5
configure elrp-client disable-port exclude 6
configure elrp-client disable-port exclude 7
configure elrp-client disable-port exclude 8
configure elrp-client disable-port exclude 9
configure elrp-client disable-port exclude 10
configure elrp-client disable-port exclude 11
configure elrp-client disable-port exclude 12
configure elrp-client disable-port exclude 13
configure elrp-client disable-port exclude 14
configure elrp-client disable-port exclude 15
configure elrp-client disable-port exclude 16
configure elrp-client disable-port exclude 17
configure elrp-client disable-port exclude 18
configure elrp-client disable-port exclude 19
configure elrp-client disable-port exclude 20
configure elrp-client disable-port exclude 21
configure elrp-client disable-port exclude 22
configure elrp-client disable-port exclude 23
configure elrp-client disable-port exclude 24
#
# Module ems configuration.
#
#
# Module epm configuration.
#
#
# Module erps configuration.
#
#
# Module esrp configuration.
#
#
# Module ethoam configuration.
#
#
# Module etmon configuration.
#
#
# Module hal configuration.
#
#
# Module idMgr configuration.
#
#
# Module ipSecurity configuration.
#
#
# Module ipfix configuration.
#
#
# Module lldp configuration.
#
disable lldp ports 1
disable lldp ports 2
disable lldp ports 3
disable lldp ports 4
disable lldp ports 5
disable lldp ports 6
disable lldp ports 7
disable lldp ports 8
disable lldp ports 9
disable lldp ports 10
disable lldp ports 11
disable lldp ports 12
disable lldp ports 13
disable lldp ports 14
disable lldp ports 15
disable lldp ports 16
disable lldp ports 17
disable lldp ports 18
disable lldp ports 19
disable lldp ports 20
disable lldp ports 21
disable lldp ports 22
disable lldp ports 23
disable lldp ports 24
#
# Module mrp configuration.
#
#
# Module msdp configuration.
#
#
# Module netLogin configuration.
#
#
# Module netTools configuration.
#
configure dns-client add name-server 10.0.4.4 vr VR-Default
configure dns-client add name-server 10.0.4.194 vr VR-Default
configure dns-client add domain-suffix ccs.local
enable bootprelay ipv4 vlan Default
enable bootprelay ipv4 vlan PHS_WIFI
configure bootprelay vlan PHS_WIFI add 10.0.4.4
#
# Module ntp configuration.
#
#
# Module poe configuration.
#
#
# Module policy configuration.
#
#
# Module rip configuration.
#
enable rip
enable rip export direct cost 1
configure rip add vlan Default
configure rip add vlan PHS_WIFI
#
# Module r.png configuration.
#
#
# Module snmpMaster configuration.
#
#
# Module stp configuration.
#
#
# Module synce configuration.
#
#
# Module techSupport configuration.
#
#
# Module telnetd configuration.
#
#
# Module tftpd configuration.
#
#
# Module thttpd configuration.
#
enable web http
configure ssl certificate hash-algorithm sha512
#
# Module twamp configuration.
#
#
# Module vmt configuration.
#
#
# Module vsm configuration.
#