Hi I will configure to UPM profile. for example, When the switch received the mac address 00??cc:11:22:33 from the port 12 , and then the UPM profile run "disable port 11" command. When the switch loss the mac address from the port 12, and then the...
Hello, I have problems when doing the vlan in the switches of the x440 G2 range. I want to do 3 vlan, for example from port 1 to 10 vlan1, from port 11 to 15 vlan 2 and from port 16 to 23 vlan 3. Port 24 wants it to connect my router. I have done the...
Hi all, existing stack 450g1 running xos 15.3.5.2 new stack 450g2 running xos 22.5.1.7 Our config is dead simple; vLANS and some routes. A basic copy paste between the two stacks seems to be ok, but I would like to test the new stac...
Hello, all! There is L2 network on X670, all clients receiving VLAN untagged. At each member port, bind the MAC address of its router and disable the learning. There are customers who are connected "through" some operator, and the operator, wants to...
Hi all, we are installing a new office location with 2x stacks of X450Gs, so 16 switches total. Each has 2x 715W PSUs. Since installation a month ago we have had 10 PSU failures. This seems unusually high (we have two other similarly sized offices op...
