Hello,
I have two X590-24x-1q-2c that should work as stack and two V400-48t-10GE4.
Is it possible to have stacking + vpex support enabled at the same time?
X590-24x-1q-2c.7 # enable vpex
Error: Cannot enable VPEX if stacking-support is enabled
X590-24x-1q-2c.8 # show stacking
Stack Topology is a Daisy-Chain
Active Topology is a Daisy-Chain
Node MAC Address Slot Stack State Role Flags
------------------ ---- ----------- ------- ---
*00:04:96:ce:7b:da - Disabled Master ---
* - Indicates this node
Flags: (C) Candidate for this active topology, (A) Active Node
(O) node may be in Other active topology
X590-24x-1q-2c.9 # sho stacking-support
Stack Available Ports
Port Native Alternate Configured Current
----- ----------------- ---------- ----------
1 Yes * No Native Native
2 Yes * No Native Native
stacking-support: Enabled Enabled
Flags: * - Current stack port selection
X590-24x-1q-2c.10 # show version
Switch : 800900-00-04 1925N-41266 Rev 04 BootROM: N/A IMG: 22.7.1.2
Image : ExtremeXOS version 22.7.1.2 22.7.1.2-patch1-8 by release-manager
on Mon Sep 30 13:25:53 EDT 2019
Diagnostics : 3.0
Certified Version : EXOS Linux 3.18.123, FIPS fips-ecp-2.0.16
X590-24x-1q-2c.11 #
