cancel
Showing results for 
Search instead for 
Did you mean: 

X870 serial port Error: E749: empty buffer

X870 serial port Error: E749: empty buffer

Nico_A_
New Contributor III

Hello together,

 

I tried connecting to a X870 (Firmware: 30.2.1.8) via the serial console, but the only thing I got back was this message:

“E749: empty buffer”

 

Unfortunately I was unable to find the source of this, maybe you can help me out with this.  8b7397bb3bd444aab5e49653d9d7ced5_1f609.png

 

Greetings

Nico

1 ACCEPTED SOLUTION

Nico_A_
New Contributor III

Hi Tomasz,

Unfortunately the X870 Stack with this issue got corrupt a few hours after I wrote. So I rebooted all slots, the VIM message dose not appear anymore.

Thanks

 

View solution in original post

2 REPLIES 2

Nico_A_
New Contributor III

Hi Tomasz,

Unfortunately the X870 Stack with this issue got corrupt a few hours after I wrote. So I rebooted all slots, the VIM message dose not appear anymore.

Thanks

 

Tomasz
Valued Contributor II

Hi Nico,

 

Just a quick check: did you try to reboot the switch for another attempt?

This error sounds like Vim error message, [esc] and then ‘:wq’ might work but I didn’t encounter that on EXOS so far to be honest.

 

Hope that helps,

Tomasz

GTM-P2G8KFN