ExtremeSwitching (EXOS/Switch Engine) - Page 500 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

FW 22.1.1.5 unable to unconfigure Tacacs

I have a customer using FW Version 21.1.1.4 We did an update to 22.1.1.5 Since then under configuration aaa there is tacacs configuration which I can't delete/unconfigure. Also after unconfigure switch all the tacacs config is present. Someone an ...

Info Vlan DGB

Hello Community, i have a loop in my network, the switch sample this log Toggling AdminState on Port 13 with pif 0x5c9ca0 Someone else has had this log. The version is 16.1.4.2 patch1-7.

EXOS VM absorbing ERPS packets causing other switch to stay in Pending ERPS state

After a lot of unsuccessful tries to build a VM lab with 5 switches in EAPS ring and other 2 in a ERPS subring of the main ring, I started to capture packets in VirtualBox and found out that the switches are absorbing the R-APS packets instead of for...

May I connect with SSH2 or telnet to the decicated MGMT-port (VR-Mgmt VLAN)?

Hello, team! I've configured IPs for MGMT-ports of all my Exteme switches and connected them to dedicated 2960. Ping works fine but I am unable to connect to the switches with SSH or telnet. Is it possible? Thanks!

ACL for blocking none valid dhcp requests

Hi! Is it possible to block relayed DHCP request that doesn't contain a specific option60 or a specific range of customers source mac-adress (inbedded in the DHCP request, not source mac because the requests are relayed) in a ACL? With regards Mat...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN