XOS update, how to activate new version?

[Rahman_Duran1]

Hi,

I just downloaded v.16.1.1.4 xos and ssh images to x440 and rebooted the switch. The documents I read says when I reboot the new firmware activates. But after rebooting it is still using ver. 15.2.

So how can I use new version?

Current State: OPERATIONAL Image Selected: primary
Image Booted: primary
Primary ver: 15.2.1.5
Secondary ver: 16.1.1.4

Config Selected: primary.cfg
Config Booted: primary.cfg

primary.cfg Created by ExtremeXOS version 15.2.1.5
127187 bytes saved on Wed Aug 5 19:41:39 2015

[Andrew_Maldonad]

Rahman,

The behavior experienced is due to a known bug that has been addressed in later code. Here is a GTAC article with more information regarding the bug.

https://gtacknowledge.extremenetworks.com/articles/Solution/After-downloading-and-installing-SSH-mod...

-Andrew

[Prashanth_KG]

I am aware of a known issue in the previous versions which exhibited this behaviour.
use image " command is neglected after downloading the EXOS image and SSH.xmod file one after the other.

I will test this in the lab in 16.1.1.4 and see if the behaviour can be replicated. Will keep you updated.

[andreas1]

use image secondary
Then reboot

[Stephane_Grosj1]

Interesting. I never ran into that situation.