ExtremeSwitching (EXOS/Switch Engine) - Page 115 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Connected port not blinking on x450-g2 but starts blinking on x440-g2

Dear community,I have a problem connecting a postage meter (which has a normal RJ45 ethernet port) to one of our core switches (x450-g2). The port is enabled but for some reason, the port on the device (postage meter) does not start to blink at all (...

Resolved! How to resolve OpenSSH Vulnerable Version Detection in Extreme Core Switch X460G2

Any suggest how to resolve OpenSSH Vulnerable Version Detection in Extreme X460G2 model switches. Current Firmware Version : 22.5.1.7

Resolved! Upgrade versions

Hello, I need to upgrade some X460-G2 switches from 22.6.1.4 to the latest version.My question is if I need to jump from 22.6.1.4 to:22.7.1.2 then 30.1.1.4, I mean one jump until I got to the latest versionOr if I can jump directly to the latest vers...

Resolved! Comments in ACLs

I’m curious if theres syntax for comments in acl policy files written on EXOS switches. If I create an acl1.pol in vi, can I add comment lines here and there? Whats the character that denotes the line is a comment?I’m sure I could experiment with # ...

acl issue Protocol needs to be set to TCP or UDP, before setting "destination-port".

I’m getting this error on an exos switch when trying to refresh a policyLine 29 : Protocol needs to be set to TCP or UDP, before setting "destination-port". Here’s an example what I added.entry acl1_deny36 { if { protocol tcp; source-address 0.0.0.0/...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN