XOS Upgrade show * and . in upgrade progress

[Andrew_Mead]

We are upgrading an X450A 48 port switches from XOS 15.3.1.4 to 15.3.5.2

There are three switches in a stack.

During the upgrade the we see a some * instead of the . showing progress.

Does anyone know what the * means?

Normally we see lots of .........

All three switches show the new version on the secondary image.

Is it okay to reboot the stack as we had * in the progress?

Thanks for your help.

Andy

[Andrew_Mead]

Thanks Patrick, rebooted all seems okay.

Booted on the new image on secondary.

:-)

[Patrick_Voss]

Hello Andrew,

Those * typically show up on non master nodes and are completely normal. You are ok to reboot the switch as long as you see the install in the cli.