cancel
Showing results for 
Search instead for 
Did you mean: 

2017-10-09: New GTAC Knowledge Articles October 01 - 07, 2017

2017-10-09: New GTAC Knowledge Articles October 01 - 07, 2017

Ken_Thomas
Contributor II
Here are the new articles that were published October 01 - October 07, 2017 in GTAC Knowledge:

Sunday, October 01, 2017:
none

Monday, October 02, 2017:
S-Series - Blade Reset - Dune error with only hex values in the message
Can the SSA-FB-MOUNTKIT be used with the SSA130 or 150 Platforms?
STP Auto-Edge does not properly detect edge ports
S-Series - High CPU Utilization - Many PIM neighbors out one port - tRtrPtcls task
How to create and add ports to a port group in Extreme Management Center
AP-Aware / auth-override policy Feature not working on C5

Tuesday, October 03, 2017:
How To Manage Device Access on Your Network with NetSight Groups
JFFS2 error: (374) jffs2_get_inode_nodes: can not read 964 bytes from 0x0020ac3c, error code: -5.
do I need to enable ELRP on all the VLANs where physical ports are identical?
How to configure alarms based on traps in Extreme Management Center
Intel Clients not getting an IP address
How to reduce MTU on Extreme Management Center Ubuntu platform

Wednesday, October 04, 2017:
200-series GUI Capability Lost
Incorrect date in Web GUI page ‘Port Web Access Control History Log Summary’ on 200-series
NetSight server service won't start terminated unexpectedly
SNMP Contact Lost to Securestack
How to change agentless assessment password
Unable to enforce policy from NAC to EWC
L2PT is not working after MPLS path failover

Thursday, October 05, 2017:
What Are Some Security Features the 800-Series provides to protect Access to Switch Management?
AP not Responsive in OneView Maps
Syslog messages on Netsight Console shown with wrong time
How to send a successful captive portal login to a custom page.
Using script for running CLI commands
What is WIPS?

Friday, October 06, 2017:
How to set the netlogin retry authentication time
EMC - Device Configuration Enforce could remove VLANs from an existing switch configuration.
AP Won't "Connect" to controller after 1 Hour of power loss
MAC to IP address resolution failed due to multiple IPs being received in Netsight NAC Manager
Why is 10.41.01 firmware not available for certain controller models?
Where can I find the definition of Alarms in ADSP?
Reboot of the Netsight v8 triggers reauthentication on NACs
How to redeem Entitlement ID and generate license key for Extreme Management Control in Extreme Port...
Expected data throughput or performance loss for Wireless Clients using secure tunnel on the AP's
Enabling IPFIX on a stack generates "aspenIpfixCallback" warning messages
Is it possible to integrate WiNG devices to NAC?
Client disconnects- AP trace.log reports krn: ath_linux.c:660-ath_netdev_hardstart_generic()-ath_tx_...

Saturday, October 07, 2017:
Authentication request became stale on Windows 10 with CRL revoked message in Event log
How to disable SSH login for root access
NAC appliance running out of memory
2 REPLIES 2

Phil_storey
Contributor
Hi Do you have a guide to getting the onboard Radius server working in V5.8.5 when using DOT1X and MSCHAPV2, I have set this up and it all looks to be working but the radius times out, shows its running but I don't think it is ( this is on the RFS7000 using a mixture of 7131 and 7532 AP's )

Drew_C
Valued Contributor III
Better visibility if this goes into its own topic. Please reference the new conversation here: Is there a guide for configuring WiNG's onboard RADIUS server?
GTM-P2G8KFN