Adding on X670G2 to an existing OSPF network

[JohanHendrikx]

The OSPF network is a X460-24t and two cisco routers. all configured in the same area.

The fimrware of the X460 and the X670 is 16.1.2.14.

But for some reason the X670 is not learning or distribute any route.

How can I troubleshoot this ?

[OscarK]

Can you post show ospf interfaces ?

[JohanHendrikx]

no change.

[Ariyakudi_Srini]

From the X670's perspective, check if all the subnets that needs to be advertised are all active and OSPF ready.

[JohanHendrikx]

subnet is active an ospf ready

[OscarK]

Hello Johan, is neighborship established ? Are area's configured right, is the mtu the same between the neighbors ? Is your license sufficient ? (some edge licenses cannot be DR/BDR).