How to configure voice and data vlan on the same 200 series switch

[Niyas]

Hi Team,

we have 2 VLANs for voice and data, we need to access both VLAN on the same 200 series switch port.

what are the procedures to configure the switch port?

[Niyas]

Hi Ronald

I have already configured, need to remove Switchport access VLAN 10?

[Ronald_Dvorak]

no need for "switchport access vlan 10" because you configure it with "switchport trunk native vlan 10"

[Niyas]

1. Enter config


(Extreme 220) #config


2. Enter port config mode
(Extreme 220) (Config)#interface 1/0/2

3. Configure the following
(Extreme 220) (Interface 1/0/2)#voice vlan 110
(Extreme 220) (Interface 1/0/2)#switchport mode access
(Interface 1/0/2)#switchport access vlan 10
(Interface 1/0/2)#switchport trunk native vlan 10
(Interface 1/0/2)#switchport trunk allowed vlan 110
(Interface 1/0/2)#exit

This is correct or not?

[Niyas]

Thanks for your updates