Manage PoE

[Anonymous]

Hi all !
I need turn on/off power on PoE ports from my application, not from web interface. Can I solve this task using automated telnet or SNMP commands for some switch models?

[Roy_Noh]

Hello Igor,

EXOS supports both RFC 3621 and EXTREME-PoE-MIB but all the OIDs are supported read-only.

http://documentation.extremenetworks.com/exos_22.1/EXOS_21_1/Configuration_Management_Enhancements/r...
http://documentation.extremenetworks.com/exos_22.1/EXOS_21_1/Configuration_Management_Enhancements/r...

So, I think you need to find another way to manage your PoE switches.
As Jason wrote above, how about using some scripts instead?

[Jason_Parker]

Another tool you can use via ssh or telnet is placing the commands in Extreme Management Center or the previous application Netsight Console but using the feature "execute command script" Jason

[Anonymous]

Thanks all!
I understand that it concerns management through telnet.
Especially I'm interested in the power management using SNMP, i.e. Power over Ethernet MIB(rfc 3621).

[Steven_Lin]

Hello Igor,
We provide the slot POE admin status through SNMP currently as below to control whether inline power is provided by the slot.
.1.3.6.1.4.1.1916.1.27.1.2.1.9

Regarding the "Location of Extreme Networks MIBs", please go through below article.
https://gtacknowledge.extremenetworks.com/articles/Q_A/Location-of-Extreme-Network-MIBs-Management-I...