Removing stacking from: BootRom

[Dave_Hanna]

So we had a couple of switches that had previously been in a 4-slot stack. Stacking was disabled but when 2 of these switch where put in a stack and enable again they had slot-3 & 4 appear and don't have master capable turned on.. ie they are stuck at the AAA login screen.

When i spacebar boot into the BootRom, i can type config none && boot but they still get stuck with stacking still on??

BootRom is only 1.0.x.x and i plan to update this tomoz morning.
Will this us allow to wipe both config and stacking?

Do we need to completely unconfigure the switch before stacking them again??

[Naresh]

Hi Dave,

Could you please try rebooting the switch by executing the command "REBOOT AS MASTER-CAPABLE".

If the Special Login "REBOOT AS MASTER-CAPABLE" Does Not Work, then please download the EXOS image from bootrom to recover the switch, please follow the article to download the image from bootrom,
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Use-the-Boot-Rom-Menu-to-Download-a...

Note: this will remove all configuration, and files from your switch.

Regards,
Naresh.C

[Dave_Hanna]

Flashing another copy of XOS does not remove the stacking config.
We have logged a ticket with extreme as the BootRom is like 1.0.1.1 or there abouts.

as none of the decent commands to remove config work