what is the best way to reboot an entire stack of 3 switches?

[Stanley_Riley_J]

I'm assuming that reboot stack-topology will reboot all 3 switches in the stack and have them come back up without changing slots.

Is this true or is there some other way that I should reboot them?

[Andrew_Imam]

The reboot stack-topology when issued from the stack master node should also reboot the entire stack.

[Stanley_Riley_J]

Thanks Darren. I have a tendency to overthink these things sometimes. 🙂

[Darren_Saliva]

I usually just use the reboot command without specifying a slot and the entire stack reboots.