ExtremeSwitching (VSP/Fabric Engine) - Page 10 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! S-MLT painful, same i-sids on both members reqd

I am aware of documents likehttps://extreme-networks.my.site.com/ExtrArticleDetail?an=000083230which says: "All VLANs, with an I-SID assigned, must be configured on both the local and the remote vIST peer"Turns out however that i-sid declaration on b...

Resolved! How to Upgrade VSP8284 XQS switch Firmware using WinSCP?

Hello,I am planning to upgrade the firmware of the VSP8284 XQS switch. Can I do it via WinSCP?Meaning load the firmware to the switch using WinSCP and then apply the firmware to the current version.RegardsSval.

Resolved! capture and view interface traffic locally - or best practices to achieve similiar

Hi i'd like to know if there is a similiar simple way on a voss switch to capture traffic on the box itself from a port with a circular/linear buffer, a la cisco...monitor caputre buffer BUF size 2048 max-size 1518 circular"maybe add some ACL to pre-...

Resolved! Migrating cisco having vrrp/hsrp to extreme fabric SPBM

I am migrating traditional cisco-based setup having HSRP installed using 2 Layer 3 cat4500 core switches & there are other cisco switches in distribution & access level.I need to design the new network using end to end extreme fabric solution using 7...

Failed to convert interface vlan

Hello,Maybe I'm missing sth obvious, is this "normal"? :Test_BEB:1(mgmt:vlan)#convert vlan 4046 WARNING: The existing mgmt interface will be deleted and re-created with the given parameters, please reconnect to the switch and issue 'mgmt convert-comm...

Top Kudoed Authors

User

Count

40

26

23

18

10

GTM-P2G8KFN