Hi - does anyone know if its possible to keep all ports on a Fabric Switch with Auto-Sense configured and return only the VLAN VSA from a RADIUS server? The VLAN to I-SID association will already be configured on the switch manually.This is similar ...
Hi Team,I´m bit confused about use SLPP in SPB net. I read that SLPP bpdus can´t travel trought NNI links, so you can´t enable on it, so:In COREs:-Enable SLPP on both cores-Enable SLPP on desired VLANs In EDGE switches:- Enabled SLPP-GUARD on UNI ...
We have some 5420M-48W-4YE-FabricEngine running 9.0.3.0. They are managed by XIQ-SE running 24.2.15.5. I have set the RADIUS server IP address for CLI and Web authentication to the IP of the XIQ-SE and I have set the RADIUS server IP address for eap ...
New to setting up MLT and wanted to get some experienced opinions.We are migrating a security cam server (high bandwidth traffic) from a VM to a physical box. This server sends data to 2 different NAS devices for viewing/archiving.Currently the traf...
1)Using guest-isid solely for WoL does not seem to be possible when dynamic VLAN assignment is used.We can configure a 802.1x enabled port with "eapol traffic-control in" which means that ingress traffic will be denied before (successful) authenticat...
