ExtremeSwitching (VSP/Fabric Engine) - Page 110 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

VSP 7000 - v8.0.0 : How this works? ipmc-threshold-exceeded-cnt

Hello community! Any one could tell me how ipmc-threshold works? I am testing an VSP7254 switch. I need to know how this device works when getting to the MGID limits. I am confused, becouse sending very few multicast flows, the threashold ipmc cou...

Resolved! Does disabling LACP affect service?

Hi all, I tried to continue existing similar topic but perhaps it is better to start a new one. I have 2x VSP7200 stacked switches connected with 4x10G ports in a LAG to a Cisco VHS cluster, at Cisco end it is a single PortChannel. Now we need to add...

Resolved! SMLT - Config VSP 4450 + ERS4926

Hi All, I have 2 VSPs 4450 connected via V-IST working good. I am trying to connect a ERS in both VSPs with MLT. ERS = Standard MLT (Ports 1 and 2) VSPs = SMLT (Port 12 each switch) When I leave MLT connection on the VSP as standard it works goo...

VSP9k export BGP routes to ISIS / SPBm with BGP community filter

Hi all, As described above we are trying to get the routes from BGP transmitted by ISIS to the rest of the network. This ofc works, however there is one major thing to take into consideration. We need to apply metrics / weight / cost / ... to the I...

SSH or Telnet to a VRRP address VSP-8404C

Hi Everyone, Just running into a problem with SSH'ing into a a VRRP address on a VSP-8404C switch. By default, on our old Nortel Cores... no commands are required to SSH or Telnet into the VRRP IP address. I've tried searching for Extreme VSP solut...

Top Kudoed Authors

User

Count

34

18

18

18

8

GTM-P2G8KFN